fbpx

Carrier gas furnace error code 23

Carrier gas furnace0 comments

Carrier gas furnace error code 23

Carrier gas furnace error code 23 is a critical error code for the common Carrier furnace. It indicates the thermostat has determined that the burner flame is not properly lit.

This article will discuss Carrier gas furnace error code 23 and what it means to have this issue typically.

The Carrier Gas Furnace error code 23 is called the “Emergency Shutdown” error code. The furnace stops, producing a loud noise, and the light on the control panel starts flashing.

The cause of this error could be that the gas levels are too low or there is a high carbon monoxide level. The best way to solve this issue would be to turn off all power sources, open all windows and doors, and call your local gas company for help.

Carrier Gas Furnace Error Code 23 is an example of Carrier Gas Furnace error code 23. This article provides insight into what causes this heating system problem so that you can troubleshoot it yourself or call your local gas company for help when needed

Carrier Gas Furnace Error Code 23 usually means a problem with the burner control system. There are different troubleshooting steps for this error code, some of which include checking each burner for proper operation, checking the thermal sensor and checking the flame sensor. This can be fixed by replacing the older models’ flame sensor, ignitor, coil assembly, or circuit board.

“Inspections, Installations, Repairs & Maintenance”